dmesg - benchmarking for memory
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-25-generic (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39~precise1-Ubuntu SMP Tue Feb 26 00:11:13 UTC 2013 (Ubuntu 3.5.0-25.39~precise1-generic 3.5.7.4)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: /nForce, BIOS F15 08/04/2005
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 00F0000000 mask FFFE000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f4db0-0x000f4dbf] mapped at [c00f4db0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x36288000-0x3713bfff]
[ 0.000000] ACPI: RSDP 000f6740 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 7fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: FACP 7fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: DSDT 7fff30c0 046D3 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7fff0000 00040
[ 0.000000] ACPI: APIC 7fff77c0 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7ffeffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
[ 0.000000] On node 0 totalpages: 524159
[ 0.000000] free_area_init_node: node 0, pgdat c18cc940, node_mem_map f5288200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2312 pages used for memmap
[ 0.000000] HighMem zone: 293610 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7be3000 s34176 r0 d23168 u57344
[ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4194048 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007fff0)
[ 0.000000] Memory: 2049404k/2097088k available (6063k kernel code, 47232k reserved, 2998k data, 760k init, 1183688k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc18da000 - 0xc1998000 ( 760 kB)
[ 0.000000] .data : 0xc15ebcd5 - 0xc18d9800 (2998 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15ebcd5 (6063 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1607.794 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3215.58 BogoMIPS (lpj=6431176)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004046] Security Framework initialized
[ 0.004081] AppArmor: AppArmor initialized
[ 0.004084] Yama: becoming mindful.
[ 0.004170] Mount-cache hash table entries: 512
[ 0.004491] Initializing cgroup subsys cpuacct
[ 0.004496] Initializing cgroup subsys memory
[ 0.004510] Initializing cgroup subsys devices
[ 0.004513] Initializing cgroup subsys freezer
[ 0.004517] Initializing cgroup subsys blkio
[ 0.004520] Initializing cgroup subsys perf_event
[ 0.004562] mce: CPU supports 5 MCE banks
[ 0.004853] SMP alternatives: switching to UP code
[ 0.018090] Freeing SMP alternatives: 24k freed
[ 0.018120] ACPI: Core revision 20120320
[ 0.024049] ftrace: allocating 27189 entries in 54 pages
[ 0.036102] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036424] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.077795] CPU0: AMD Sempron(tm) Processor 2600+ stepping 02
[ 0.080004] Performance Events: AMD PMU driver.
[ 0.080004] ... version: 0
[ 0.080004] ... bit width: 48
[ 0.080004] ... generic registers: 4
[ 0.080004] ... value mask: 0000ffffffffffff
[ 0.080004] ... max period: 00007fffffffffff
[ 0.080004] ... fixed-purpose events: 0
[ 0.080004] ... event mask: 000000000000000f
[ 0.080004] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080004] Brought up 1 CPUs
[ 0.080004] Total of 1 processors activated (3215.58 BogoMIPS).
[ 0.080004] devtmpfs: initialized
[ 0.080004] EVM: security.selinux
[ 0.080004] EVM: security.SMACK64
[ 0.080004] EVM: security.capability
[ 0.080004] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
[ 0.080004] dummy:
[ 0.080004] RTC time: 12:38:07, date: 03/20/13
[ 0.080004] NET: Registered protocol family 16
[ 0.080004] EISA bus registered
[ 0.080004] node 0 link 0: io port [1000, fffff]
[ 0.080004] TOM: 0000000080000000 aka 2048M
[ 0.080004] node 0 link 0: mmio [a0000, bffff]
[ 0.080004] node 0 link 0: mmio [80000000, ff70ffff]
[ 0.080004] bus: [00, ff] on node 0 link 0
[ 0.080004] bus: 00 [io 0x0000-0xffff]
[ 0.080004] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.080004] bus: 00 [mem 0x80000000-0xfcffffffff]
[ 0.080004] ACPI: bus type pci registered
[ 0.107868] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.108023] PCI: PCI BIOS revision 2.10 entry at 0xfadd0, last bus=2
[ 0.108030] PCI: Using configuration type 1 for base access
[ 0.109729] bio: create slab at 0
[ 0.109878] ACPI: Added _OSI(Module Device)
[ 0.109881] ACPI: Added _OSI(Processor Device)
[ 0.109884] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.109886] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.110962] ACPI: EC: Look up EC in DSDT
[ 0.115602] ACPI: Interpreter enabled
[ 0.115614] ACPI: (supports S0 S1 S4 S5)
[ 0.115640] ACPI: Using IOAPIC for interrupt routing
[ 0.116596] ACPI: Power Resource [ISAV] (on)
[ 0.122402] ACPI: No dock devices found.
[ 0.122415] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.122497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.122589] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.122593] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.122597] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.122601] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.122605] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.122607] PCI: root bus 00: hardware-probed resources
[ 0.122662] PCI host bridge to bus 0000:00
[ 0.122667] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.122671] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.122675] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[ 0.122694] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
[ 0.122704] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[ 0.122767] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
[ 0.122807] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
[ 0.122818] pci 0000:00:01.1: reg 10: [io 0xe400-0xe41f]
[ 0.122835] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.122841] pci 0000:00:01.1: reg 24: [io 0x2000-0x203f]
[ 0.122860] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.122879] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
[ 0.122889] pci 0000:00:02.0: reg 10: [mem 0xf6003000-0xf6003fff]
[ 0.122923] pci 0000:00:02.0: supports D1 D2
[ 0.122927] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122943] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
[ 0.122953] pci 0000:00:02.1: reg 10: [mem 0xf6004000-0xf6004fff]
[ 0.122987] pci 0000:00:02.1: supports D1 D2
[ 0.122991] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123005] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
[ 0.123017] pci 0000:00:02.2: reg 10: [mem 0xf6005000-0xf60050ff]
[ 0.123058] pci 0000:00:02.2: supports D1 D2
[ 0.123061] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123082] pci 0000:00:05.0: [10de:00df] type 00 class 0x068000
[ 0.123092] pci 0000:00:05.0: reg 10: [mem 0xf6000000-0xf6000fff]
[ 0.123099] pci 0000:00:05.0: reg 14: [io 0xb800-0xb807]
[ 0.123130] pci 0000:00:05.0: supports D1 D2
[ 0.123133] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123147] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
[ 0.123157] pci 0000:00:06.0: reg 10: [io 0xbc00-0xbcff]
[ 0.123164] pci 0000:00:06.0: reg 14: [io 0xc000-0xc07f]
[ 0.123171] pci 0000:00:06.0: reg 18: [mem 0xf6001000-0xf6001fff]
[ 0.123199] pci 0000:00:06.0: supports D1 D2
[ 0.123212] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
[ 0.123234] pci 0000:00:08.0: reg 20: [io 0xf000-0xf00f]
[ 0.123266] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
[ 0.123276] pci 0000:00:0a.0: reg 10: [io 0x09f0-0x09f7]
[ 0.123283] pci 0000:00:0a.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.123290] pci 0000:00:0a.0: reg 18: [io 0x0970-0x0977]
[ 0.123297] pci 0000:00:0a.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.123303] pci 0000:00:0a.0: reg 20: [io 0xdc00-0xdc0f]
[ 0.123310] pci 0000:00:0a.0: reg 24: [io 0xe000-0xe07f]
[ 0.123337] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
[ 0.123371] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
[ 0.123403] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.123430] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.123452] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.123474] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.123517] pci 0000:01:00.0: [10de:0314] type 00 class 0x030000
[ 0.123534] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff]
[ 0.123544] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref]
[ 0.123578] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.123642] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[ 0.123650] pci 0000:00:0b.0: bridge window [mem 0xf2000000-0xf3ffffff]
[ 0.123655] pci 0000:00:0b.0: bridge window [mem 0xe0000000-0xefffffff pref]
[ 0.123684] pci 0000:02:0a.0: [8086:107c] type 00 class 0x020000
[ 0.123700] pci 0000:02:0a.0: reg 10: [mem 0xf5020000-0xf503ffff]
[ 0.123709] pci 0000:02:0a.0: reg 14: [mem 0xf5000000-0xf501ffff]
[ 0.123718] pci 0000:02:0a.0: reg 18: [io 0xa000-0xa03f]
[ 0.123744] pci 0000:02:0a.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.123773] pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
[ 0.123800] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.123805] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
[ 0.123809] pci 0000:00:0e.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.123820] pci_bus 0000:00: on NUMA node 0
[ 0.123824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.123926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.124181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.124282] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.153172] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.153235] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.153295] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.153351] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.153410] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.153467] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.153524] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.153582] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.153637] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.153695] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.153750] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.153808] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.153873] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.153932] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.153988] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.154044] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.154106] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.154170] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.154265] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.154335] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.154405] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.154473] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.154518] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 0.154593] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.154672] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 0.154750] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 0.154828] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 0.154906] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 0.154984] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 0.155033] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 0.155109] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.155187] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 0.155266] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 0.155345] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.155430] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
[ 0.155515] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0
[ 0.155715] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.155719] vgaarb: loaded
[ 0.155721] vgaarb: bridge control possible 0000:01:00.0
[ 0.156079] SCSI subsystem initialized
[ 0.156157] libata version 3.00 loaded.
[ 0.156196] ACPI: bus type usb registered
[ 0.156231] usbcore: registered new interface driver usbfs
[ 0.156246] usbcore: registered new interface driver hub
[ 0.156282] usbcore: registered new device driver usb
[ 0.156419] PCI: Using ACPI for IRQ routing
[ 0.156429] PCI: pci_cache_line_size set to 64 bytes
[ 0.156491] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.156494] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[ 0.156660] NetLabel: Initializing
[ 0.156663] NetLabel: domain hash size = 128
[ 0.156664] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.156684] NetLabel: unlabeled traffic allowed by default
[ 0.167391] AppArmor: AppArmor Filesystem Enabled
[ 0.167440] pnp: PnP ACPI init
[ 0.167464] ACPI: bus type pnp registered
[ 0.167503] pnp 00:00: [io 0x1000-0x107f]
[ 0.167507] pnp 00:00: [io 0x1080-0x10ff]
[ 0.167511] pnp 00:00: [io 0x1400-0x147f]
[ 0.167514] pnp 00:00: [io 0x1480-0x14ff]
[ 0.167517] pnp 00:00: [io 0x1800-0x187f]
[ 0.167521] pnp 00:00: [io 0x1880-0x18ff]
[ 0.167589] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.167593] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.167603] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.167607] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.167611] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.167615] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.167621] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167844] pnp 00:01: [mem 0x000d0000-0x000d3fff]
[ 0.167848] pnp 00:01: [mem 0x000d9000-0x000dbfff]
[ 0.167852] pnp 00:01: [mem 0x000f0000-0x000fbfff]
[ 0.167855] pnp 00:01: [mem 0x000fc000-0x000fffff]
[ 0.167859] pnp 00:01: [mem 0x7fff0000-0x7fffffff]
[ 0.167862] pnp 00:01: [mem 0xffff0000-0xffffffff]
[ 0.167866] pnp 00:01: [mem 0x00000000-0x0009ffff]
[ 0.167869] pnp 00:01: [mem 0x00100000-0x7ffeffff]
[ 0.167873] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.167877] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.167934] system 00:01: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.167938] system 00:01: [mem 0x000d9000-0x000dbfff] has been reserved
[ 0.167942] system 00:01: [mem 0x000f0000-0x000fbfff] could not be reserved
[ 0.167946] system 00:01: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.167951] system 00:01: [mem 0x7fff0000-0x7fffffff] could not be reserved
[ 0.167955] system 00:01: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.167959] system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.167964] system 00:01: [mem 0x00100000-0x7ffeffff] could not be reserved
[ 0.167968] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.167973] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.167977] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.168075] pnp 00:02: [bus 00-ff]
[ 0.168080] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.168083] pnp 00:02: [io 0x0cf0-0x0cf3]
[ 0.168087] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.168091] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.168095] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.168098] pnp 00:02: [mem 0x000c0000-0x000dffff window]
[ 0.168102] pnp 00:02: [mem 0x80000000-0xfebfffff window]
[ 0.168178] pnp 00:02: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.168799] pnp 00:03: [io 0x0010-0x001f]
[ 0.168803] pnp 00:03: [io 0x0022-0x003f]
[ 0.168806] pnp 00:03: [io 0x0044-0x005f]
[ 0.168810] pnp 00:03: [io 0x0062-0x0063]
[ 0.168813] pnp 00:03: [io 0x0065-0x006f]
[ 0.168816] pnp 00:03: [io 0x0074-0x007f]
[ 0.168820] pnp 00:03: [io 0x0091-0x0093]
[ 0.168823] pnp 00:03: [io 0x00a2-0x00bf]
[ 0.168827] pnp 00:03: [io 0x00e0-0x00ef]
[ 0.168830] pnp 00:03: [io 0x04d0-0x04d1]
[ 0.168833] pnp 00:03: [io 0x0800-0x0805]
[ 0.168837] pnp 00:03: [io 0x0290-0x0297]
[ 0.168935] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.168939] system 00:03: [io 0x0800-0x0805] has been reserved
[ 0.168944] system 00:03: [io 0x0290-0x0297] has been reserved
[ 0.168948] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.168965] pnp 00:04: [dma 4]
[ 0.168968] pnp 00:04: [io 0x0000-0x000f]
[ 0.168972] pnp 00:04: [io 0x0080-0x0090]
[ 0.168975] pnp 00:04: [io 0x0094-0x009f]
[ 0.168979] pnp 00:04: [io 0x00c0-0x00df]
[ 0.169037] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.169051] pnp 00:05: [io 0x0070-0x0073]
[ 0.169065] pnp 00:05: [irq 8]
[ 0.169128] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.169140] pnp 00:06: [io 0x0061]
[ 0.169199] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.169211] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.169217] pnp 00:07: [irq 13]
[ 0.169278] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.169577] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.169585] pnp 00:08: [irq 4]
[ 0.169697] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.169920] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.169928] pnp 00:09: [irq 3]
[ 0.170024] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.170322] pnp 00:0a: [io 0x0378-0x037f]
[ 0.170329] pnp 00:0a: [irq 7]
[ 0.170424] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.170556] pnp: PnP ACPI: found 11 devices
[ 0.170558] ACPI: ACPI bus type pnp unregistered
[ 0.170564] PnPBIOS: Disabled by ACPI PNP
[ 0.207384] Switching to clocksource acpi_pm
[ 0.207460] pci 0000:00:0e.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
[ 0.207466] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3000000-0xf301ffff pref]
[ 0.207472] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
[ 0.207479] pci 0000:00:0b.0: bridge window [mem 0xf2000000-0xf3ffffff]
[ 0.207484] pci 0000:00:0b.0: bridge window [mem 0xe0000000-0xefffffff pref]
[ 0.207492] pci 0000:02:0a.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.207496] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.207500] pci 0000:00:0e.0: bridge window [io 0xa000-0xafff]
[ 0.207505] pci 0000:00:0e.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.207510] pci 0000:00:0e.0: bridge window [mem 0x80000000-0x800fffff pref]
[ 0.207526] pci 0000:00:0e.0: setting latency timer to 64
[ 0.207531] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.207535] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.207539] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff]
[ 0.207543] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf3ffffff]
[ 0.207547] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
[ 0.207551] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.207555] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.207559] pci_bus 0000:02: resource 2 [mem 0x80000000-0x800fffff pref]
[ 0.207619] NET: Registered protocol family 2
[ 0.207697] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.207966] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.207966] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.207966] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.207966] TCP: reno registered
[ 0.207966] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.207966] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.207966] NET: Registered protocol family 1
[ 0.207966] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 0.280232] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 0.352230] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 0.352310] pci 0000:01:00.0: Boot video device
[ 0.352317] PCI: CLS 32 bytes, default 64
[ 0.352844] audit: initializing netlink socket (disabled)
[ 0.352862] type=2000 audit(1363783087.348:1): initialized
[ 0.387062] Trying to unpack rootfs image as initramfs...
[ 0.428267] highmem bounce pool size: 64 pages
[ 0.428284] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.436532] VFS: Disk quotas dquot_6.5.2
[ 0.436617] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.437433] fuse init (API version 7.19)
[ 0.437553] msgmni has been set to 1690
[ 0.452380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.452461] io scheduler noop registered
[ 0.452464] io scheduler deadline registered (default)
[ 0.452480] io scheduler cfq registered
[ 0.452664] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.452697] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.452893] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.452901] ACPI: Power Button [PWRB]
[ 0.452972] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.452975] ACPI: Power Button [PWRF]
[ 0.457790] GHES: HEST is not enabled!
[ 0.480593] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.480628] isapnp: Scanning for PnP cards...
[ 0.572514] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.657879] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.696913] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.764041] Linux agpgart interface v0.103
[ 0.764083] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[ 0.764091] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 0.764099] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[ 0.765459] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xf0000000
[ 0.772526] brd: module loaded
[ 0.773547] loop: module loaded
[ 0.773842] pata_acpi 0000:00:08.0: power state changed by ACPI to D0
[ 0.773848] pata_acpi 0000:00:08.0: power state changed by ACPI to D0
[ 0.773902] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.774160] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 0.774186] pata_acpi 0000:00:0a.0: setting latency timer to 64
[ 0.774690] Fixed MDIO Bus: probed
[ 0.774779] tun: Universal TUN/TAP device driver, 1.6
[ 0.774781] tun: (C) 1999-2004 Max Krasnyansky
[ 0.774873] PPP generic driver version 2.4.2
[ 0.774935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.774995] ehci_hcd 0000:00:02.2: setting latency timer to 64
[ 0.775000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 0.775008] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 0.775039] ehci_hcd 0000:00:02.2: debug port 1
[ 0.775045] ehci_hcd 0000:00:02.2: cache line size of 32 is not supported
[ 0.775071] ehci_hcd 0000:00:02.2: irq 20, io mem 0xf6005000
[ 0.784057] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 0.784120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.784124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.784128] usb usb1: Product: EHCI Host Controller
[ 0.784132] usb usb1: Manufacturer: Linux 3.5.0-25-generic ehci_hcd
[ 0.784135] usb usb1: SerialNumber: 0000:00:02.2
[ 0.784329] hub 1-0:1.0: USB hub found
[ 0.784337] hub 1-0:1.0: 8 ports detected
[ 0.784440] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.784508] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.784512] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.784521] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.784556] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf6003000
[ 0.876088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.876096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876100] usb usb2: Product: OHCI Host Controller
[ 0.876103] usb usb2: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
[ 0.876106] usb usb2: SerialNumber: 0000:00:02.0
[ 0.876288] hub 2-0:1.0: USB hub found
[ 0.876296] hub 2-0:1.0: 4 ports detected
[ 0.876415] ohci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.876420] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 0.876428] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 0.876467] ohci_hcd 0000:00:02.1: irq 21, io mem 0xf6004000
[ 0.934050] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.934057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.934061] usb usb3: Product: OHCI Host Controller
[ 0.934065] usb usb3: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
[ 0.934068] usb usb3: SerialNumber: 0000:00:02.1
[ 0.934245] hub 3-0:1.0: USB hub found
[ 0.934253] hub 3-0:1.0: 4 ports detected
[ 0.934361] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.934461] usbcore: registered new interface driver libusual
[ 0.934523] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.942275] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.942290] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.942478] mousedev: PS/2 mouse device common for all mice
[ 0.942643] rtc_cmos 00:05: RTC can wake from S4
[ 0.942789] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.942815] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.942893] device-mapper: uevent: version 1.0.3
[ 0.942982] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.943044] EISA: Probing bus 0 at eisa.0
[ 0.943048] EISA: Cannot allocate resource for mainboard
[ 0.943051] Cannot allocate resource for EISA slot 1
[ 0.943054] Cannot allocate resource for EISA slot 2
[ 0.943057] Cannot allocate resource for EISA slot 3
[ 0.943060] Cannot allocate resource for EISA slot 4
[ 0.943062] Cannot allocate resource for EISA slot 5
[ 0.943065] Cannot allocate resource for EISA slot 6
[ 0.943068] Cannot allocate resource for EISA slot 7
[ 0.943070] Cannot allocate resource for EISA slot 8
[ 0.943073] EISA: Detected 0 cards.
[ 0.943086] cpuidle: using governor ladder
[ 0.943088] cpuidle: using governor menu
[ 0.943091] EFI Variables Facility v0.08 2004-May-17
[ 0.948360] ashmem: initialized
[ 0.948545] TCP: cubic registered
[ 0.948694] NET: Registered protocol family 10
[ 0.948951] NET: Registered protocol family 17
[ 0.948971] Key type dns_resolver registered
[ 0.949047] Using IPI No-Shortcut mode
[ 0.949195] PM: Hibernation image not present or could not be loaded.
[ 0.949213] registered taskstats version 1
[ 1.119717] isapnp: No Plug & Play device found
[ 1.328668] Freeing initrd memory: 15056k freed
[ 1.349658] Key type trusted registered
[ 1.353052] Key type encrypted registered
[ 1.356603] Magic number: 5:337:633
[ 1.356743] rtc_cmos 00:05: setting system clock to 2013-03-20 12:38:08 UTC (1363783088)
[ 1.356819] powernow-k8: Power state transitions not supported
[ 1.356855] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20120320/processor_perflib-341)
[ 1.356869] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.356872] EDD information not available.
[ 1.357049] Freeing unused kernel memory: 760k freed
[ 1.357947] Write protecting the kernel text: 6064k
[ 1.357970] Write protecting the kernel read-only data: 2492k
[ 1.357972] NX-protecting the kernel data: 4176k
[ 1.384093] Refined TSC clocksource calibration: 1607.823 MHz.
[ 1.384104] Switching to clocksource tsc
[ 1.393371] udevd[84]: starting version 175
[ 1.520104] usb 2-2: new low-speed USB device number 2 using ohci_hcd
[ 1.662927] pata_amd 0000:00:08.0: version 0.4.1
[ 1.662949] pata_amd 0000:00:08.0: power state changed by ACPI to D0
[ 1.662955] pata_amd 0000:00:08.0: power state changed by ACPI to D0
[ 1.663008] pata_amd 0000:00:08.0: setting latency timer to 64
[ 1.693150] scsi0 : pata_amd
[ 1.696084] scsi1 : pata_amd
[ 1.696727] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.696731] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.697408] sata_nv 0000:00:0a.0: version 3.5
[ 1.697475] sata_nv 0000:00:0a.0: setting latency timer to 64
[ 1.700092] scsi2 : sata_nv
[ 1.703036] scsi3 : sata_nv
[ 1.703246] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 22
[ 1.703251] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 22
[ 1.703382] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.703581] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 1.703591] forcedeth 0000:00:05.0: setting latency timer to 64
[ 1.707151] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.707157] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.707329] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 1.735046] usb 2-2: New USB device found, idVendor=413c, idProduct=2003
[ 1.735054] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.735058] usb 2-2: Product: Dell USB Keyboard
[ 1.735062] usb 2-2: Manufacturer: Dell
[ 2.140430] ata2.00: ATAPI: TEAC DVD+RW DV-W58E, D.0C, max UDMA/33
[ 2.140444] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13)
[ 2.156196] ata2.00: configured for UDMA/33
[ 2.157760] scsi 1:0:0:0: CD-ROM TEAC DVD+RW DV-W58E D.0C PQ: 0 ANSI: 5
[ 2.159024] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.159030] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.159661] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.159893] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.222297] e1000 0000:02:0a.0: eth0: (PCI:33MHz:32-bit) 00:1b:21:11:c7:9e
[ 2.222312] e1000 0000:02:0a.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.224443] forcedeth 0000:00:05.0: ifname eth1, PHY OUI 0x57d @ 1, addr 00:14:85:84:c7:31
[ 2.224451] forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
[ 2.240046] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.248225] ata3.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
[ 2.248229] ata3.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.256192] ata3.00: configured for UDMA/133
[ 2.256347] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
[ 2.256609] sd 2:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.256670] sd 2:0:0:0: [sda] Write Protect is off
[ 2.256675] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.256701] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.257054] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.312426] sda: sda1 sda2 < sda5 sda6 >
[ 2.312930] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.724024] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.732223] ata4.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133
[ 2.732227] ata4.00: 156250000 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.740205] ata4.00: configured for UDMA/133
[ 2.740357] scsi 3:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5
[ 2.740589] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.740704] sd 3:0:0:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.740764] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.740768] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.740799] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.754915] sdb: sdb1
[ 2.755253] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.763150] usbcore: registered new interface driver usbhid
[ 2.763155] usbhid: USB HID core driver
[ 2.786506] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
[ 2.786862] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-2/input0
[ 3.230934] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 3.230943] EXT4-fs (sda6): write access will be enabled during recovery
[ 3.576778] EXT4-fs (sda6): orphan cleanup on readonly fs
[ 3.576801] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 531887
[ 3.576945] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 532870
[ 3.576964] EXT4-fs (sda6): 2 orphan inodes deleted
[ 3.576966] EXT4-fs (sda6): recovery complete
[ 3.671950] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 14.280165] Adding 1998844k swap on /dev/sda1. Priority:-1 extents:1 across:1998844k
[ 14.295092] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.295103] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 14.359973] udevd[350]: starting version 175
[ 14.433190] lp: driver loaded but no devices found
[ 14.570491] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 14.570567] i2c i2c-1: nForce2 SMBus adapter at 0x2000
[ 14.743442] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 14.767034] parport_pc 00:0a: reported by Plug and Play ACPI
[ 14.767081] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 14.852280] lp0: using parport0 (interrupt-driven).
[ 14.968913] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 15.219044] Bluetooth: Core ver 2.16
[ 15.219159] NET: Registered protocol family 31
[ 15.219163] Bluetooth: HCI device and connection manager initialized
[ 15.219166] Bluetooth: HCI socket layer initialized
[ 15.219169] Bluetooth: L2CAP socket layer initialized
[ 15.219175] Bluetooth: SCO socket layer initialized
[ 15.232949] ppdev: user-space parallel port driver
[ 15.249517] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.249525] Bluetooth: BNEP filters: protocol multicast
[ 15.280115] Bluetooth: RFCOMM TTY layer initialized
[ 15.280125] Bluetooth: RFCOMM socket layer initialized
[ 15.280128] Bluetooth: RFCOMM ver 1.11
[ 15.383800] type=1400 audit(1363783102.521:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=636 comm="apparmor_parser"
[ 15.395049] type=1400 audit(1363783102.533:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=636 comm="apparmor_parser"
[ 15.473811] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.507970] type=1400 audit(1363783102.645:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=653 comm="apparmor_parser"
[ 15.509978] type=1400 audit(1363783102.649:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=653 comm="apparmor_parser"
[ 15.510525] type=1400 audit(1363783102.649:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=653 comm="apparmor_parser"
[ 15.743745] nvidia: module license 'NVIDIA' taints kernel.
[ 15.743753] Disabling lock debugging due to kernel taint
[ 15.884494] microcode: AMD CPU family 0xf not supported
[ 16.368744] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[ 16.368790] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[ 16.690698] init: failsafe main process (747) killed by TERM signal
[ 16.999350] intel8x0_measure_ac97_clock: measured 84403 usecs (4112 samples)
[ 16.999357] intel8x0: clocking to 47292
[ 17.004877] type=1400 audit(1363783104.145:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=851 comm="apparmor_parser"
[ 17.025544] type=1400 audit(1363783104.165:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=855 comm="apparmor_parser"
[ 17.031894] type=1400 audit(1363783104.169:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=855 comm="apparmor_parser"
[ 17.033574] type=1400 audit(1363783104.173:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=855 comm="apparmor_parser"
[ 17.040856] forcedeth 0000:00:05.0: eth1: no link during initialization
[ 17.041899] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.043882] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.089695] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 17.090169] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.091260] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.128677] type=1400 audit(1363783104.269:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=858 comm="apparmor_parser"
[ 17.171038] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.969784] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 17.969819] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 17.971639] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.36 Tue Sep 11 12:14:54 PDT 2012
[ 18.010069] init: udev-fallback-graphics main process (1004) terminated with status 1
[ 18.668388] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 18.668409] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 18.668447] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 57.728016] usb 2-1: new low-speed USB device number 3 using ohci_hcd
[ 57.942800] usb 2-1: New USB device found, idVendor=413c, idProduct=3200
[ 57.942846] usb 2-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 57.942851] usb 2-1: Product: Dell USB Mouse
[ 57.942855] usb 2-1: Manufacturer: Dell
[ 57.953527] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input3
[ 57.953696] hid-generic 0003:413C:3200.0002: input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:02.0-1/input0
[ 86.624848] audit_printk_skb: 36 callbacks suppressed
[ 86.624856] type=1400 audit(1363783173.765:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1900 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 119.308140] e1000: eth0 NIC Link is Down
[ 123.316426] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 243.556132] e1000: eth0 NIC Link is Down
[ 245.560695] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 373.359999] type=1400 audit(1363783460.501:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=641 comm="cupsd" pid=641 comm="cupsd" capability=36 capname="block_suspend"
[ 569.696041] usb 2-3: new full-speed USB device number 4 using ohci_hcd
[ 569.908990] usb 2-3: New USB device found, idVendor=058f, idProduct=9254
[ 569.908998] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 569.909003] usb 2-3: Product: Generic USB Hub
[ 569.909006] usb 2-3: Manufacturer: ALCOR
[ 569.912124] hub 2-3:1.0: USB hub found
[ 569.915416] hub 2-3:1.0: 4 ports detected
[ 570.222014] usb 2-3.3: new low-speed USB device number 5 using ohci_hcd
[ 570.338988] usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a2
[ 570.338995] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 570.339000] usb 2-3.3: Product: 2Port KVMSwicther
[ 570.339003] usb 2-3.3: Manufacturer: No brand
[ 570.339006] usb 2-3.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
[ 570.362136] input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.3/2-3.3:1.0/input/input4
[ 570.362523] hid-generic 0003:10D5:55A2.0003: input,hidraw2: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:02.0-3.3/input0
[ 570.365063] usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint
[ 576.220123] e1000: eth0 NIC Link is Down
[ 577.610882] forcedeth 0000:00:05.0: eth1: link up
[ 577.611386] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 580.090437] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 615.920564] usb 2-1: USB disconnect, device number 3
[ 616.601800] usb 2-2: USB disconnect, device number 2
[ 623.470023] usb 2-3.1: new low-speed USB device number 6 using ohci_hcd
[ 623.583019] usb 2-3.1: New USB device found, idVendor=413c, idProduct=2003
[ 623.583027] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 623.583032] usb 2-3.1: Product: Dell USB Keyboard
[ 623.583035] usb 2-3.1: Manufacturer: Dell
[ 623.594799] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input5
[ 623.594949] hid-generic 0003:413C:2003.0004: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-3.1/input0
[ 626.318018] usb 2-3.2: new low-speed USB device number 7 using ohci_hcd
[ 626.431032] usb 2-3.2: New USB device found, idVendor=413c, idProduct=3200
[ 626.431040] usb 2-3.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 626.431045] usb 2-3.2: Product: Dell USB Mouse
[ 626.431048] usb 2-3.2: Manufacturer: Dell
[ 626.441759] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input6
[ 626.441937] hid-generic 0003:413C:3200.0005: input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:02.0-3.2/input0
[ 2386.863456] usb 2-3: USB disconnect, device number 4
[ 2386.863464] usb 2-3.1: USB disconnect, device number 6
[ 2386.868755] usb 2-3.2: USB disconnect, device number 7
[ 2386.869566] usb 2-3.3: USB disconnect, device number 5
[ 2523.376043] usb 2-3: new full-speed USB device number 8 using ohci_hcd
[ 2523.588079] usb 2-3: New USB device found, idVendor=058f, idProduct=9254
[ 2523.588088] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2523.588092] usb 2-3: Product: Generic USB Hub
[ 2523.588096] usb 2-3: Manufacturer: ALCOR
[ 2523.591162] hub 2-3:1.0: USB hub found
[ 2523.594193] hub 2-3:1.0: 4 ports detected
[ 2523.905078] usb 2-3.1: new low-speed USB device number 9 using ohci_hcd
[ 2524.018075] usb 2-3.1: New USB device found, idVendor=413c, idProduct=2003
[ 2524.018082] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2524.018087] usb 2-3.1: Product: Dell USB Keyboard
[ 2524.018090] usb 2-3.1: Manufacturer: Dell
[ 2524.029873] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input7
[ 2524.030020] hid-generic 0003:413C:2003.0006: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-3.1/input0
[ 2524.105079] usb 2-3.2: new low-speed USB device number 10 using ohci_hcd
[ 2524.218080] usb 2-3.2: New USB device found, idVendor=413c, idProduct=3200
[ 2524.218088] usb 2-3.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2524.218093] usb 2-3.2: Product: Dell USB Mouse
[ 2524.218097] usb 2-3.2: Manufacturer: Dell
[ 2524.228810] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input8
[ 2524.228986] hid-generic 0003:413C:3200.0007: input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:02.0-3.2/input0
[ 2525.282076] usb 2-3.3: new low-speed USB device number 11 using ohci_hcd
[ 2525.399106] usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a2
[ 2525.399114] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2525.399119] usb 2-3.3: Product: 2Port KVMSwicther
[ 2525.399123] usb 2-3.3: Manufacturer: No brand
[ 2525.399126] usb 2-3.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
[ 2525.422525] input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.3/2-3.3:1.0/input/input9
[ 2525.422841] hid-generic 0003:10D5:55A2.0008: input,hidraw2: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:02.0-3.3/input0
[ 2525.425153] usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint
[ 2637.347583] usb 2-3: USB disconnect, device number 8
[ 2637.347591] usb 2-3.1: USB disconnect, device number 9
[ 2637.356640] usb 2-3.2: USB disconnect, device number 10
[ 2637.359222] usb 2-3.3: USB disconnect, device number 11
[ 2655.128044] usb 2-3: new full-speed USB device number 12 using ohci_hcd
[ 2655.341047] usb 2-3: New USB device found, idVendor=058f, idProduct=9254
[ 2655.341055] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2655.341060] usb 2-3: Product: Generic USB Hub
[ 2655.341063] usb 2-3: Manufacturer: ALCOR
[ 2655.344393] hub 2-3:1.0: USB hub found
[ 2655.347209] hub 2-3:1.0: 4 ports detected
[ 2655.658060] usb 2-3.1: new low-speed USB device number 13 using ohci_hcd
[ 2655.775049] usb 2-3.1: New USB device found, idVendor=413c, idProduct=2003
[ 2655.775057] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2655.775062] usb 2-3.1: Product: Dell USB Keyboard
[ 2655.775065] usb 2-3.1: Manufacturer: Dell
[ 2655.786870] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input10
[ 2655.787039] hid-generic 0003:413C:2003.0009: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-3.1/input0
[ 2655.866064] usb 2-3.2: new low-speed USB device number 14 using ohci_hcd
[ 2655.983069] usb 2-3.2: New USB device found, idVendor=413c, idProduct=3200
[ 2655.983077] usb 2-3.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2655.983082] usb 2-3.2: Product: Dell USB Mouse
[ 2655.983086] usb 2-3.2: Manufacturer: Dell
[ 2655.993787] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input11
[ 2655.993962] hid-generic 0003:413C:3200.000A: input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:02.0-3.2/input0
[ 2657.138073] usb 2-3.3: new low-speed USB device number 15 using ohci_hcd
[ 2657.255184] usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a2
[ 2657.255192] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2657.255196] usb 2-3.3: Product: 2Port KVMSwicther
[ 2657.255200] usb 2-3.3: Manufacturer: No brand
[ 2657.255203] usb 2-3.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
[ 2657.278189] input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.3/2-3.3:1.0/input/input12
[ 2657.278330] hid-generic 0003:10D5:55A2.000B: input,hidraw2: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:02.0-3.3/input0
[ 2657.281123] usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint
[ 2673.203195] usb 2-3: USB disconnect, device number 12
[ 2673.203203] usb 2-3.1: USB disconnect, device number 13
[ 2673.211140] usb 2-3.2: USB disconnect, device number 14
[ 2673.213359] usb 2-3.3: USB disconnect, device number 15
[ 2754.852036] usb 2-3: new full-speed USB device number 16 using ohci_hcd
[ 2755.065042] usb 2-3: New USB device found, idVendor=058f, idProduct=9254
[ 2755.065049] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2755.065054] usb 2-3: Product: Generic USB Hub
[ 2755.065058] usb 2-3: Manufacturer: ALCOR
[ 2755.068397] hub 2-3:1.0: USB hub found
[ 2755.071222] hub 2-3:1.0: 4 ports detected
[ 2755.382046] usb 2-3.1: new low-speed USB device number 17 using ohci_hcd
[ 2755.499048] usb 2-3.1: New USB device found, idVendor=413c, idProduct=2003
[ 2755.499056] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2755.499060] usb 2-3.1: Product: Dell USB Keyboard
[ 2755.499064] usb 2-3.1: Manufacturer: Dell
[ 2755.510842] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.0/input/input13
[ 2755.510994] hid-generic 0003:413C:2003.000C: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:02.0-3.1/input0
[ 2755.590045] usb 2-3.2: new low-speed USB device number 18 using ohci_hcd
[ 2755.707040] usb 2-3.2: New USB device found, idVendor=413c, idProduct=3200
[ 2755.707048] usb 2-3.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2755.707052] usb 2-3.2: Product: Dell USB Mouse
[ 2755.707056] usb 2-3.2: Manufacturer: Dell
[ 2755.717786] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.2/2-3.2:1.0/input/input14
[ 2755.718289] hid-generic 0003:413C:3200.000D: input,hidraw1: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:02.0-3.2/input0
[ 2756.778067] usb 2-3.3: new low-speed USB device number 19 using ohci_hcd
[ 2756.895039] usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a2
[ 2756.895047] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2756.895051] usb 2-3.3: Product: 2Port KVMSwicther
[ 2756.895055] usb 2-3.3: Manufacturer: No brand
[ 2756.895058] usb 2-3.3: SerialNumber: 02\xffffffc2\xffffff92\xffffff92
[ 2756.918206] input: No brand 2Port KVMSwicther as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.3/2-3.3:1.0/input/input15
[ 2756.918347] hid-generic 0003:10D5:55A2.000E: input,hidraw2: USB HID v1.10 Keyboard [No brand 2Port KVMSwicther] on usb-0000:00:02.0-3.3/input0
[ 2756.921421] usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint